In short
The Reprogramaciones MBV workshop is at Ronda de la Pescadería, 24, bajo, 28801 Alcalá de Henares (Madrid), in the Venecia neighbourhood, south of the historic centre and next to the Puerta del Vado area. It is the workshop of Eurorepar Talleres Hnos. Barriopedro Gil. From Madrid and the Henares corridor you get there via the A-2; from Arganda and Loeches, via the M-300. Here we do the jobs that require removing or opening a control unit (cloning, bench or boot-mode reads, instrument cluster repair) and any ECU remap or diagnosis if you would rather bring the car in. We are open Monday to Friday, 8:00–14:00 and 16:00–19:30 (closed on Saturday and Sunday). Book 48 hours in advance by WhatsApp on 641 125 798 or on the workshop phone, 918 81 02 66; you can wait at the workshop and be present while we work.
Where we are
The workshop
- Address
- Ronda de la Pescadería, 24, bajo, 28801 Alcalá de Henares (Madrid)
- Opening hours
- Monday to Friday, 8:00–14:00 and 16:00–19:30 (closed on Saturday and Sunday)
- Area
- Venecia neighbourhood, District I, south of the historic centre, next to the Puerta del Vado
- Workshop phone
- 918 81 02 66
- 641 125 798
- Before you come
- Message or call us for an appointment, 48 hours in advance
As well as being an ECU remapping brand, it is a Eurorepar mechanical workshop. That matters more than it seems: if a clutch or a sensor needs replacing before the car is remapped, you don't have to take it somewhere else and come back.
How to get here
- From Madrid and the Henares corridor: take the A-2 towards Barcelona. Take one of the Alcalá exits towards the centre and carry on to the south of the historic centre, to the Puerta del Vado and Paseo de Pastrana area. Ronda de la Pescadería is there.
- From Arganda del Rey, Loeches or the south-east: via the M-300, which links Arganda with Alcalá without going through Madrid.
- From Meco, Camarma or Daganzo: come down to Alcalá on the local roads and cross the city towards the south of the centre.
The address is all you need in your phone's sat nav. The only thing to bear in mind is that the streets in the historic centre are narrow and many are pedestrianised: don't try to cut through the centre, go round it on the ring roads. The workshop has no customer parking of its own.
Opening hours and waiting
We are open Monday to Friday, 8:00–14:00 and 16:00–19:30 (closed on Saturday and Sunday). These are also the hours when we answer the phone and WhatsApp and when we do call-outs; we are closed at weekends. If you would rather not leave the car, you can wait at the workshop and be present while we work.
What is done at the workshop and not elsewhere
Almost everything we do can also be done by coming to you. What needs the workshop is anything that requires removing and opening a unit:
| Job | Why at the workshop |
|---|---|
| ECU cloning and BSI cloning | Both units usually have to be opened and their memory read directly |
| Remapping control units that can only be read when opened | Bench or boot-mode reading is done with the unit removed and on the bench |
| Instrument cluster repair | It is hands-on electronics work: removal, repair and testing |
| Preliminary mechanical repairs | Those the check finds before remapping |
If your case falls into this table and you live far away, you can have the unit removed at your usual garage and send us just the part by courier, or ask us to come and collect it. We explain it when you book.
If you live nearby, it is sometimes better to come in
For anyone in Alcalá or the surrounding towns (Torrejón de Ardoz, Villalbilla, Meco, Los Santos de la Humosa, Torres de la Alameda), bringing the car in is usually simpler than waiting for a slot for us to come out. The same goes if the car can be driven and the job is a long one: you drop it off, get on with your day and pick it up.
On the other hand, if the car won't start or you can't get out, we come to you, within Alcalá too. How call-outs work across the whole region is explained under service area.
Tell us the vehicle and the job and we will give you an appointment, how long we will need the car and the price.
Reviewed on .